hairydairymaid_debrickv22_winxp 
get it to work and some off its error msg. 

this is test on a wrt54GS !


first edit Debrick.ini (MAKE SURE ITS THIS ONE !!!)

TCK = 1; 
TMS = 2; 
TDI = 0; 
TDO = 4; 

------------ 
then: 
use: 
pinprinter to wrt54g sider the 12pin(not the 10pin) 
2 <- > 100ohm <-> 3 
3 <- > 100ohm <-> 9 
4 <- > 100ohm <-> 7 
13 <- > 100ohm <-> 5 
20 <------------------> gnd(one off 2,4,6,8,10, DO not use 12 its not conekted) 
25 <- (to 20 on the printport,GND) 

if you run the program and get error: 

CHIP ID: 00000000000001100000000001111111 (0006007F) = link (to long kabel max 20cm long kabel!!) 
CHIP ID: 11111111111111111111111111111111 (FFFFFFFF) = no power no link 
CHIP ID: 00010100011100010010000101111111 (1471217F) = you done it 
CHIP ID: 00000000000000000000000000000000 (00000000) = you have got one ore more ins worng 

if you need to flash it you have to do it max 2sek after restart and not before 0,5sek after power on. 

NB: it takes a long time to flash the ship !! 

the rest:
first 
wrtjtag.exe -erase:nvram
wrtjtag.exe -erase:kernel
wrtjtag.exe -flash:cfe

http://lonewolf.hacker-nin.com/wrt/cfe/  <-download the rigth cfe.bin file 

and the
ping 192.168.1.1

then
tftp -i 192.168.1.1 put c:\WRT54GS_3.37.2_ETSI_code.bin

wait 2min and the led stopflash :)
and http://192.168.1.1 work :)



my nick on irc is Erik_- if you have problems or jtag at ranvik dot net